During the Project development, the team
achieved get different experiences about the inmotic system creation. The team
obtained the waited for results, this due to it was able to learn a new focus
type in the technology, in the use and implementation of automatic systems.
Within the considered expectations, was reached a gratifying result about the
model creation that symbolize the BAS.
However,
exist different aspects that the team should change about the project creation.
For example, the planning, this due to the mockup could be made better and more
detailed, with the purpose of create a work able to accomplish the minimum
establish requirements, at the same time that it give new and original ideas
for improve this type of systems. Another thing that should change is the
organization, because it can provide a great work team if it is apply.
lunes, 23 de noviembre de 2015
domingo, 11 de octubre de 2015
Budget Cost Form
|
Component/Activity
|
Description
|
Cost Item
|
|
Materials
|
|
|
|
Buzzer (1)
|
Acoustic
transducer that emits a sharp sound.
|
$43
|
|
Step Motor (Bipole) (1)
|
Four way
out motor.
|
$120
|
|
Motor DC (1)
|
Motor that
transform the electric energy in mechanical energy.
|
$30
|
|
Resistor (8)
|
Physical
resistance to the current flow.
|
$8
|
|
Red LED (1)
|
Diode that
emits a RED light when electric current flow through it.
|
$2
|
|
White LED (6)
|
Diode that
emits a Shiny WHITE light when electric current flow through it.
|
$36
|
|
Two PIN terminal (9)
|
Screw
Terminals with 3.5mm pitch pins.
|
$18
|
|
Light resistor (1)
|
Resistance
that change with the light intensity. It glows with the dark and decrease
with the light.
|
$9
|
|
Female connector (1)
|
Analogic
connector of 25 plugs to connect parallel port.
|
$35
|
|
20 PIN Socket dip (1)
|
Connector
with 20 electric exits.
|
$9
|
|
8 PIN Dip Switch (1)
|
Connector
with 8 electric exits.
|
$16
|
|
Integrated circuit 74LS245 (1)
|
The device
allows data transmission from the A Bus to the B Bus or from the B Bus to the
A Bus depending upon the logic level at the direction control (DIR) input.
The enable input (G) can be used to disable the device so that the buses are
effectively isolated.
|
|
|
Consumables
|
|
|
|
UTP (2 meters)
|
Electrical
wire that can permit the current flow.
|
$50
|
|
Parallel wire(1)
|
This is
the computer wire defined for IEEE 1284 standard.
|
$295
|
|
Phenolic Plate (1)
|
Plate that
permits the copper engraved and is resistant to the humidity.
|
$40
|
|
Ferric chloride (1)
|
Acid
liquid that remove some substances from the phenolic plate.
|
$29
|
|
Solder paste (1)
|
Material
that, with tin soldering, is able to make a type of glue for electric
components.
|
$29
|
|
White glue(1)
|
A white
liquid to paste wood parts.
|
$59
|
|
Tin soldering (2)
|
The Tin,
permit join the parts of the devices in the phenolic plate.
|
$40
|
|
Bought-in parts
|
|
|
|
Wood (walls)
|
Fine layer
of wood.
|
$240
|
|
Wood (Base)
|
Thickness
layer of wood.
|
$170
|
|
Manufacturing
|
|
|
|
Solar Battery (1)
|
Battery
compound by burned copper and other substances that is able to transform
solar energy into electric energy.
|
---
|
|
Equipment buy/hire
|
|
|
|
Galvanometer (1)
|
Measurement device that
gives the ampere potential in an electronic circuit.
|
$115
|
|
Multimeter (1)
|
Measurement device that
gives various type of potentials in an electronic circuit.
|
Loan
|
|
Travel/ subsistence
|
|
|
|
Protoboard (2)
|
Board to practice different
types of electric system and circuits.
|
$160
|
|
Other
|
|
|
|
|
|
|
|
|
Total costs
|
$1,593
|
Suscribirse a:
Entradas (Atom)